Volvo makes trench work safer with new pipelayer kit for excavators

Volvo Construction Equipment has a new attachment kit that allows its 14-ton excavators to be converted into rotating pipelayers and also improve trench safety.

Spare parts Volvo: high quality and competitive prices at AGA Parts

The pipelaying boom can be attached to the excavator’s main boom in about an hour. With a rated load of 7,300 pounds, pipes up to 20 inches in diameter can be handled.

When used in tandem with Volvo excavators’ rotating superstructure, the kit gives the operator more maneuverability and control when placing pipe without having to reposition the tracks. It is also designed to be ready for transport within minutes.

“The kit was developed in response to customers’ safety concerns about lowering pipes into trenches using standard excavators,” the company says. “And unlike a traditional side boom pipelayer, Volvo’s patented rotating superstructure means the machine is far more maneuverable, with no need to constantly reposition its tracks. All this versatility in a single machine means operators can get the job done easier, quicker, safer and at a lower cost.”

The boom has a working height of up to 24 feet and depth of 50 feet. The kit is designed for Volvo’s EC140EL and ECR145E crawler excavators. The ECR145E has a 5-foot tail-swing radius, which enables pipelaying in urban areas. It can be used to lay pipe on a two-lane city street with one lane closed to traffic, Volvo says.

Another advantage of the pipelaying boom is that the operator always faces the load, unlike a side boom, the company says. Volvo’s Load Moment Indicator allows operation on a slope of up to 10 degrees.

Business Read More

What Should You Look For In a Good Cold Storage Installation?

When the temperature drops at night, it’s a good time to consider purchasing a cold air storage unit for your business or home. The right one will keep your food fresh and ready to serve all day and night long. Whether you choose a unit designed for commercial use or one intended for your own personal use, you’ll need to make sure that it has been installed properly.Pin on cold storage warehouse

A cold air storage unit works by using a compressor to heat up a tank filled with air. After the air is heated, it is then pumped into your food preparation areas. This saves the hassle of having to stack bags of frozen foods in a cooler or keeping frozen items in your refrigerator. In fact, if the unit you choose uses the best technology available today, you won’t have to worry about anything at all.

Cold air storage units are often plagued with an issue called condensation. This is when moisture collects in the tank and drips into the floor. Fortunately, this problem can easily be avoided by making sure that the liner of your unit is kept dry. However, it is also important to make sure that the condensation doesn’t form in the tank as well as in the floor of the refrigerator or freezer.

Because the refrigerant used in cold air storage units lam kho lanh gia re isn’t particularly efficient, it is very important that the unit is serviced at regular intervals. If you aren’t serviced regularly, it’s possible to find that the temperature of your frozen foods will increase considerably without you even noticing it.

Another common problem that can arise with a cold air storage unit is that the refrigerant may leak out onto your foods while they are in storage. This will cause them to retain excessive moisture which can create bacteria and other types of contamination. You’ll want to make sure that the leak is sealed immediately to prevent this from occurring.

In the end, you will probably find that the cold air storage installation process is one that you won’t have any trouble with. In fact, it’s likely that it will go smoothly and quickly, making the entire operation a lot easier.

Once you’ve chosen a new cold storage unit, you should pay close attention to the labels that are found on the unit. If any of these aren’t functioning properly, they could be the cause of a potentially dangerous situation. For example, some labels on cold units will say that they are capable of holding two thousand five hundred gallons of liquid. If this number is smaller than the tank inside, it could lead to a spillage that could cause health issues.

To ensure that your storage unit is safe and effective, always test it thoroughly before you bring it home. The best way to do this is to hook the unit up to an oscillating screw to check the level of the liquid inside as well as to make sure that the tanks and condenser are working properly.

Business Read More

3 Benefits of Buying Furniture Online

The advantages of buying furniture online are numerous. If you choose to purchase furniture for your home online, you do not have to leave your house to do so. Your purchases will be delivered directly to your home without having to pay for the shipping costs as well as any extra fees such as sales tax.The Best Way to Paint Wood Furniture

The good thing about online shopping is that you can shop around and compare prices before making a final decision. Many people want to buy furniture for their home from different places, which is why it is important to know the price of the furniture you wish to purchase. But what if you cannot find the exact furniture you’re looking for? You don’t have to worry because you can go online and search for a variety of options that will fit in perfectly with the style and look of your home.

You can also choose to shop at different stores within the same brand. For example, if you have a dining room set that is made out of black leather, you should buy black leather furniture from a store that sells a lot of black leather. However, if you want your furniture to match your sofa set, you can simply choose a matching piece from a different store. This is a good thing to remember especially when it comes to buying furniture online because you are assured of getting quality items. You can always choose to buy furniture from a store that specializes in dining sets because they will most likely have better prices than general stores.

Another advantage of shopping furniture online son ban ghe go is the ease with which you can return a purchase if you feel like it doesn’t fit in with your needs or preferences. There are many companies online that offer free shipping on some products, but sometimes they won’t deliver the item until you make a purchase. But you can still return the product if you do not like it or you just think that there is another product out there that is much more suitable for you. But if you choose to purchase furniture online and then decide that you do not like it, you will have a number of options in order to return it. Most companies will refund shipping charges, but you may also be able to have the item returned if it doesn’t suit you. Therefore, you should consider whether the company will offer you a guarantee or refund policy before buying from them.

Online shopping is also ideal if you have a large budget. You don’t have to travel to an actual store just to purchase your furniture and you don’t need to pay the high prices that you would pay in a traditional store. You can buy furniture from the comfort of your own home or even if you aren’t at home. Just make sure that you read all the fine print on the site you plan to buy from, including the terms of shipping, return policies and the return policy, before you actually place an order. Otherwise, you could end up making costly mistakes that could leave you with a damaged piece of furniture or not being happy with your purchase at all.

In conclusion, shopping for furniture online is a great way to save time and money, but you do have to be aware of the pros and cons. So if you are thinking of buying furniture online, make sure to shop around and choose wisely before buying anything.

Business Read More


Om du har en verksamhet har du en skyldighet att föra bokföring, men du är också ansvarig över att din redovisning är korrekt enligt bokföringslagen. Redovisning är svårt att sätta sig in i och att exempelvis starta företag är nog tidskrävande som det är. För många är det skönt att få hjälp med sin redovisning och att slippa sköta redovisningsprogram och allt som hör därtill. För att slippa besväret med att ta en redovisningskurs kan du ta hjälp av en redovisningsbyrå som tar hand om redovisningen åt er.The Need for a Good Accounting Firm in Adelaide - Fusion Partners

För många företag i Göteborg är det vanligt att skaffa en redovisningsbyrå när redovisning är aktuellt. Enrekommendation är att om du exempelvis eftersöker den bästa redovisningsbyrå Göteborg har att erbjuda i sitt område är det viktigt att du hyr in en bokföringsbyrå som du har förtroende för och som du får bra rekommendationer av. Om ni anlitar en redovisningsbyrå kommer er verksamhet att få assistans inom bokföring och ni kan fokusera på det som sker runtomkring er bokföring istället. Det kan vara skönt att kunna fördela ekonomin med en bokföringsbyrå och effektivisera tiden från att ta hand om fakturor och liknande.Det är väldigt tidskrävande att ta hand om sin bokföring inom företaget och speciellt om man inte besitter de kunskaperna kan det ta mycket tid som gör att de övriga sysslorna inom företaget skjuts åt sidan.

Vad är redovisning?

Om du vet om alla viktiga faktorer, så är det ett angeläget led för att ha möjlighet att ta del av avdragsmöjligheterna på ett effektivt vis. Detta är en av anledningarna till att företag tar hjälp av en redovisningsbyrå med inriktning inom ekonomiskrådgivning, redovisning och inkomstdeklaration.

Om du har näringsverksamhet är du som företagare skyldig att upprätta bokföring. Din skyldighet att bedriva bokföring är oberoende gällande vilken omfattning företaget har eller vilken typ av företag somverksamhetenär registrerat som. Bokföring är till för att du som innehavare och för övriga företagareatt kunna se över ekonomisk information och för att kunna få grepp omverksamheten.

Redovisning är ett detaljerat system som är till för att organisera, registrera och behandla allt ekonomiskt som blir i företaget. Generellahändelser i systemetbestår av exempelvis utbetalningar, import, export för att uppgenågra av de områden som används

Gällande företagets totala redovisning är det en av de viktigaste delarna av ert företag och som är en av grundpelarna för att verksamheten skall kunnaöka sin framgång och regleras enligt verksamhetensåtaganden.

Redovisningsbyrå i Göteborg

För allt fler verksamheter i Göteborg är det väldigt vanligt att anlita en bokföringsbyrå när de behöver hjälp med inkomstdeklaration och att deklarera moms. Något som du bör ge en extra tanke är att om du förslagsvis kontaktar den bästa redovisningsbyrå Göteborg har som arbetar med moms och bokföring, så är det i högsta grad angeläget att du hyr in tjänster av en kompetent redovisningsbyrå som du känner ett starkt förtroende för och som du får seriös kontakt med.

Genom att hyra in en byrå kommer ert företag att få en mer stabil grund att arbeta utifrån inom redovisning och ni får nu en mer klar inblick kring deklaration och balansräkning. Det kommer innebära stor skillnad att ha möjligheten att se över redovisningen med en redovisningsbyrå och slippa potentiell stress från att ta hand om sin deklaration.Det går åt mycket resurser på att sköta och göra en redovisning inom sinverksamhet. Det är svårt om man inte sitter på kunskaper inom redovisning, för att det kan resultera i att företaget blir återbetalningsskyldigt.

Attredovisa är en viktig faktor i att utveckla verksamheter och för att kunna se helheten av den aktuella lägesrapporten som företaget befinner sig i. Tack vare ert redovisningsprogram kan ni se insikter och resultat månad för månad. Informationen från er redovisning ger god insikt i hur verksamheten har varit historiskt sett och hur ert företag kommer att utvecklas framåt.Redovisning har varit och är väsentlig för om en verksamhet ska ta ett steg fram eller bakåt i sin utveckling. För att utveckla sitt företag krävs insikter om det finansiella och enklast att få fram det är genom redovisning.

Business Read More

What Are Website Back links and Why Are They Crucial?

If you have just started out with your site you may be pondering what website back links are and why they are essential. Creating one way links for your blog is a really crucial step for Search engine marketing (Search Motor Optimisation) and to get your site ranked in Google and other look for engines.

Of program there are many other factors to take into account, like key phrase investigation, good quality material and great website structure to name just a handful of. But it is the back again back links that are important when receiving you site out there and getting it outlined inside Google.

So what is how to buy quality backlinks may be pondering?

Effectively it is just a url from one site back to your site. Think of your blog like an island in the ocean, when you commenced it there ended up no bridges to that island. It just sat there in open water and no person knew everything about it or could get to it with ease.

You have to give people a route or a bridge to your blog and you do this by generating weblog inbound links. The far more one way links you have the a lot more opportunity you give men and women to locate your weblog.

Now you might be considering that all you need to do is incorporate a couple of fantastic key phrases and Google will listing your blog. While key phrase research is crucial and you need to invest some time doing it proper it’s not the one particular thing that will get your weblog listed.

Google enjoys a internet site that has tons backlinks to it so backlink developing as nicely as search term investigation is key to obtaining your site outlined. Also put in a plugin get in touch with XML internet site map as this will assist with your Search engine marketing and backlinking.

So to recap a site backlink is just a website link from one particular web site again to your personal. It is a bridge so that more men and women can locate your website and Google will really like it due to the fact it starts off to give your website some authority more than other sites.

Do not at any time get into purchasing inbound links from organizations as this could do a lot more harm than great to your weblog. All your site backlinks must be free of charge and appear from high webpage rank websites like Facebook, Twitter, report directories and other weblogs in your area of interest.

Creating backlinks on blogs need to take no a lot more than fifteen minutes every single working day, purpose for 10 remarks a day and that will give you 300 backlinks in a month. This will be a enormous boast to your blogs Alexa rank and the targeted traffic that it will get.

Website backlinks ought to be a entertaining issue to do, you will often discover some thing new from the site submit your read through and it will give your site a regular circulation of targeted traffic for many years to arrive. It is long phrase but you need to commence to see benefits extremely speedily.

I nonetheless get site visitors from weblogs I posted on months back and have not been again to in a whilst so it is well value investing the time in carrying out if you want to be successful on the internet.

Business Read More

The Different Divisions of Harbor Freight

There have been many times that I have purchased an instrument that I believed I definitely needed and it proved that I rarely used it. Since I purchased at Harbor Cargo, I saved a ton of cash and have extended my instrument series as well.Find a Harbor Freight Tools Store – Harbor Freight Coupons

Despite some other reviews on the net concerning this famous merchant, I find they fill a niche and give people a selection as for their specific wants and budget due to their hardware products. I find them to be of great quality and have no problem suggesting them for some of one’s hardware needs. They have been around in business for around 40 years. Organization do not stay in operation that extended if they are not giving some value to consumers. Just like all purchases that you produce, you ought to do your personal research and ensure that everything you are getting fits your needs and budget accordingly irrespective of where you acquire them from.

In regards to Upper Resources versus Harbor Cargo, the sole comparison we must be concerned about would be these having regarding problems of quality, variety, pricing, and level of customer service you get. All things considered, in the event that you are going to be paying a fortune of methods you want to make sure to get issues answered assuming you’ve them. Additionally you want to be positive that you are obtaining the best. I tested right into a community that examines such matters to see what everyone was expressing about both companies.

There were plenty of those who talked have ordered from both businesses and due to this they are able to assess quite easily. Lots of persons claimed that when it stumbled on quality they thought that Upper was slightly better than harbor freight 20 coupon. It does not stop here. Persons wanted collection and plenty of people stated that Upper had a more impressive collection of things that their competition. You can now get that at face value, but it is much better to see relating to this for yourself. Larger does not always mean greater, particularly if the selection is for resources and equipment you simply don’t need.

Plenty of people I read consumer experiences on stated that Northern Tool has imports which are exactly the same quality as Harbor Cargo, but they do not provide nothing but imports. People who desire American produced tools can have access to them. American created methods can be purchased close to the people that have been imported. Just assume to cover slightly more in that case.

However there were some consumers who believed that the imported material Upper Methods presents is a bit over Harbor Cargo when it comes to quality. People be seemingly put off by the fact that HF does not seem to sell American made brands. Although Upper Methods seems to offer small rates, they definitely aren’t the cheapest, this is what users said. Therefore if you are looking for the best price on resources, it could be recommended for you really to use another choice or use HF.

Those who have applied both website likewise have talked of their stress at perhaps not being able to discover lots of deals for Northern. While a lot of people said they’d a less strenuous time obtaining deals for HF. Therefore this may encourage visitors to want to look at HF instead. The overall concept I obtained from users was that they seemed to be significantly more than ready to utilize both stores. Each you’ve got its skills and each one has its weaknesses. For instance, lots of people thought that each keep looked to supply issues that another one did not. Still another case is Upper Tools seems to supply very powerful guarantees on their own company methods while HF does not. Evaluate each company yourself and see what type you can visualize your self doing long haul company with.

Business Read More

Komatsu, Allison, and Caterpillar Transmissions Big Names in Heavy Duty Transmissions

It has been a drastic modify when it comes to rate along with gas effectiveness of vehicles using the Caterpillar diesel engine.Caterpillar dpf delete

It’s because of the locating of the Caterpillar motors that other advanced developments were possible. The Caterpillar engines served as the fundamentals for these inventions. That truth has been proved right to the degree that vehicle authorities and the scientists believe that actually the latest invention of the cross motor was probable due to the inputs from the Caterpillar diesel engine. Nevertheless, the Caterpillar diesel motors may not be seen or only utilized in today’s generation. They however perform a vital portion in the results of the future generation high-speed machines. There are a few persons, who still own the vehicles, which may have the old Caterpillar motors fitted inside them and they’re viewed as precious and are worth of silver as well as more.

The Caterpillar motor is considered for many years currently certainly one of typically the most popular manufacturing tools offered to us. Using the caterpillar diesel engine, the car will run at a much faster pace and the energy use will soon be paid off to a really low level allowing people to save money, which really is a key plus. Whilst the Caterpillar business is noted for developing, production and offering numerous types of engines and equipment along with different economic services and products and also insurance all over the world, they are popular one of the machinists due to their Caterpillar engine.

The annals dates back to Rudolph Diesel, involving the years of 1858-1913. This began the era of the today therefore popular diesel machines. Rudolph had generally in mind developing a progressive form of motor that will work quicker than the thing that was accessible at the time, and at the same time frame could digest less fuel. He actually needed to offer a well required boost to the automobile market by producing an engine that could actually reduce air at top speed to offer added force and boost to it.

Just how that engine works is by the fuel being shot into the compressed atmosphere with the aid of a piston. That piston might then go back to its spot at top of the engine portion and push gas in to the engine. All this is actually proven to people under the title of ignition. Basically the cat c13 egr delete motor is similar to the diesel engine with an alternative technique which allows vehicles to perform quicker while at once digest not as fuel. Because of this engine, a number of other contemporary inventions have now been also done like the cross engine. That modern type has been essentially replacing diesel engines with great success. The release of the present day engine has actually transformed the mind-set of individuals about the vehicle industry as a whole. Nevertheless we may not see this kind doing his thing inside our technology at all.

If you view a percentage of the freeway being created, and along with of the structure site are yellow trucks that usually carry the brand that claims “CAT”, with a tiny pie just underneath the letter “A”, then that emblem symbolizes a Caterpillar engine. Nevertheless, what we are going to speak about in this article would be the maritime Caterpillar motors which are typically applied to power up water vessels of any type.

Similar to the Caterpillar trucks that you see on highways, a Caterpillar marine motor can be lined in yellow, which can be the unique recognition of the machine. The yellow coat is exclusively created for caterpillar engines, which has the ability to keep unchanged for years, whether the engine is used for a heavy-duty freeway structure, or perhaps a marine vehicle that is constantly submerged in water. The orange covering alerts the tech (in the future) that what they’re working on is really a Caterpillar engine.

Business Read More

Customer Service Reps Need Negotiation Training

Practitioners commonly equate CSR with philanthropy, while the others equate it with promotion strategy of companies, truth be told, it’s neither in its truest sense. One should undertake the exercise with a longterm plan. One must certanly be distinct that probably the most profitable businesses will have a plan. They know wherever they need their business to be one, three and five years from now. They understand how several clients they will have, just how many workers and what forms of goods and solutions they’ll offer. They’ve an idea and a strategy for reaching it. CSR is an idea that ensures that you do your preparing and develop a roadmap for your success.Corporate Social Responsibility Training - Tonex Training

The goal of any business is to produce a profit, by definition. That is, in itself, neither great or poor – it is really a fact. An absolutely integrated CSR technique is a longterm plan and could add greater value to any organizations’attempts and go quite a distance towards manufacturer equity improvement, corporate name making and larger economic results on the CSR investment. In addition, CSR can be a proper tool to help the individual sector’s productive involvement in development activities.

t is through this method of growth that per capita expenditure of a community might improve causing greater use, thus it makes new company possibilities, synergies and private-public partnerships, and links customers, providers, stakeholders and towns with an individual chain called value chain. Based on the above theoretical conversation, the next definition may possibly be considered appropriate.’It’s group of practical business practices guided by honest norms that contribute to the sustainable growth of stakeholders in the value chain with the most effective curiosity of culture, organization and environment.’

There shouldn’t be any doubt inside our mind that corporate identity is the very first and defining part of making a company’s personality. One must remember that accomplishment of CSR isn’t new to the world; however, their exercise as a company technique could very well be misunderstood by many since their practice was not focused towards business goals or they certainly were undertaken as unplanned activities. In ensuring that corporate can perform this conclusion, the next business discipline may be incorporated within the organization tradition and systems. Managers must demonstrating leadership by training the position of responsible corporate citizenship. This suggests that managers must keep discipline within the organization with an strategy to make sure maximum attention of the employees and industry things and solutions that’s socially responsible.

Organizations having good leaders have been invariably a part of activities which can be person helpful with a view to offer items and solutions that are socially conducive. This really is possible if the leader gets the vision and mission of the business tuned towards this kind of approach. Steve jobs probably could be considered as the most successful corporate head of recent times and is known as to be a major determine in pc and activity market and outlined as the absolute most powerful businessman. One of his true characteristics was to keep up large satisfaction level among both workers and clients through ensuring the surface of the line product and service How to Complete the Acord 25.

The methods to issues must be useful, modern, and linked to globalization of countries by having an intention to reach sustainable progress and corporate obligation in a multi-stakeholder context. That calls for a technique that is extensive and focused to serve not only the stake holders however the state as a whole below world wide setting.

Business Read More



Jednou z najlepších vecí na drevených podlahách je ich tvrdosť a odolnosť, podlaha z dreva ale aj tie najtvrdšie drevené podlahy budú ťažiť z pravidelnej údržby, aby sa obnovil jej lesk a odstránili zjavné známky opotrebenia, ako je odieranie,voda a škvrny.

Podlahy z tvrdého dreva by ste mali z času na čas opraviť brúsením a pretmelením, aby pri pohlade vyzerali čo najlepšie. Dobrou správou je, že väčšina drevených podláh musí byť opravená iba každých 8 až 12 rokov, aj keď možno zistíte, že podlahy v niektorých častiach domácnosti potrebujú povrchovú úpravu častejšie, najmä v kuchyni, ktorá má tendenciu maˇveľa záťaže!

Ďalšou dobrou správou je, že zatiaľ čo si môžete najať profesionálne spoločnosti na renováciu a povrchovú úpravu drevených podláh – a to je niečo, čo by som veľmi odporučil, ak máte malé skúsenosti s vlastnou údržbou – je tiež možné, aby si skúsený kutil urobil prácu za zlomok nákladou.

Ak však uvažujete o renovácii podlahy alebo parkiet sami, oplatí sa výskum najlepších techník a buďte tak pripravení, ako je to len možné, aby ste predišli chybam pri práci, ktoré by mohli na vášej podlahe pôsobiť strašne! Tu je náš sprievodca pre domácich majstrov, ako opraviť podlahy z tvrdého dreva.Našu ponúku nájdete v tomto cenníku: Cenník renovácie podláh.

Prvé veci: buďte pripravení

Najväčšou chybou mnohých domácich majstrov je neuvedomovanie si, ako dlho bude práca trvať a aký druh prerušenia prinesie pre ich domov – nie je nič frustrujúcejšíe, ako opustiť prácu napoly dokončenú, pretože ste dostatočne nezohľadnili faktor. čas na to, a potom museli žiť s neúplnou časťou, kým nenájdete čas na návrat do práce. Ak nemáte dostatok času na prácu, môže to tiež výrazne ovplyvniť kvalitu práce, takže si dajte dostatok času na dobrú prácu.

Aby ste mohli opraviť podlahu z tvrdého dreva, musíte si nechať na to dva až tri dni pre svoju prácu a potom najmenej ďalšie dva dni (48 hodín), kým konečný náter tmelu (lak) úplne uschne, aby ste mohli izbu znova použiť. Počas tejto doby pravdepodobne nebudete mať prístup k ničomu, čo musí zostať v miestnosti (napríklad vstavané kuchynské spotrebiče). Aj v niektorých aktivitách nebudete mať vôbec prístup do miestnosti (napríklad pri čakaní na zaschnutie náterových hmôt), preto musíte zohľadniť skutočnosť, ako žijete doma.

Kvôli tomu všetkému, najmä ak máte rušnú domácnosť a deti, by mohol byť dobrý plán naplánovať váš dom na renovíciu podláh na predĺžený víkend, keď si zvyšok vašej rodiny môže vziať dovolenku mimo domov alebo si zariadiť zostať u starých rodičov alebo starých rodinných priateľov. A ak robíte kuchynskú podlahu, možno odídete od toho až do leta, keď si môžete grilovať jedlo vonku!

Ak chcete urobiť aj kuchynskú podlahu a nemôžete premiestniť chladničku do inej miestnosti, budete musieť zvážiť alternatívne opatrenia na uloženie niekoľkých rýchlo sa kaziacich potravín, ako je mlieko, džús, sendvičové ingrediencie – možno by vám mohli pomôcť vaši susedia?

Pamätajte, že vaši miláčikovia nebudú vítaní návštevníkmi vášho projektu úpravy podlahy. Dôrazne odporúčame umiestniť svojich domácich miláčikov do chovateľských staníc alebo nechať ich zostať s rodinou počas trvania projektu renovácie – poslednou vecou, ktorú chcete, je zvieracia srsť zabudovaná do čerstvo naneseného laku!

Predtým, ako sa vydáte ďalej: ste si istý, že to chcete urobiť?

Vážne, ak ste si prečítali všetky vyššie uvedené informácie a napriek tomu si myslíte, že by ste sa chceli pokúsiť sami opraviť podlahu z tvrdého dreva, prejdite nadol na náš zoznam a podrobného sprievodcu. Možno si budete chcieť vziať aj dovolenku a nechať to na profesionálov:

Trvalo to parketárovy asi 2 hodiny, kým sme celú izbu vybrúsili. Mysleli sme si, že by nám to mohlo trvať dvakrát tak dlho – a my sme dvaja a on bol len jeden. Nemohli sme sa viac mýliť. Trvalo nám to oveľa dlhšie!

Všeobecne možno povedať, že náklady na povrchovú úpravu drevených podláh sa pohybujú okolo 6 až 12 €uro na štvorcový meter, ak získate výhody, ktoré vám pomôžu pri práci – možno by to malo stáť za to a ušetriť!

S tým chcem povedať, ak sa pohodlne vyznáte v súbore nástrojov a vzali ste všetku logistiku do úvahy, potom renovácia svojej drevenej podlahy je na dosah ruky. Tu je to, čo budete potrebovať a ako to urobiť:

Zostavte si súpravu: Materiály a nástroje na povrchovú úpravu parkiet alebo podláh

  • Veľká pásová brúska s niekoľkými baleniami brúsnych pásov rôznej drsnosti vrátane 40, 60, 80, 100 a 240-hrubých diskov
  • Malá okrajová brúska, známa tiež ako brúska na brúsenie s brúsnymi kotúčmi zrnitosť ako je uvedené vyššie
  • Maliarska páska
  • ochranné odevy (protiprachové masky, ochranné okuliare, chrániče sluchu, kombinézy, parné respirátory, neoprénové alebo vinylové rukavice)
  • vysávač
  • handričku a handry
  • polyuretánový tmel (lak)
  • podlahárske valce s dlhou maliarskou tyčou
  • štetec
  • niečo, s čím sa má tmel zamiešať
  • vedro maliarske na lak
  • plastové plachty

Krok za krokom „Ako na to“ Príručka k povrchovej úprave tvrdého dreva


Prvá vec, ktorú musíte urobiť, je samozrejme odstrániť všetok nábytok z miestnosti. Nezabudnite si získať pomoc s ťažkými predmetmi – môžete dokonca zvážiť použitie plastových posúvačov na presunutie najväčších položiek. Brúsenie podláh vytvorí obrovské množstvo prachu, preto majte dvere zatvorené do všetkých miestností domu, ktoré nebrúsite. Možno budete chcieť umiestniť plastové plachty, aby ste na ne položili nábytok alebo koberce v oblastiach, ktoré nie je možné zapečatiť – uvedomte si však, že ani pri týchto krokoch sa po dokončení úlohy pravdepodobne nezastaví jemné usadzovanie prachu po celom dome renovácia parkiet cena.

Potom pomocou maliarskej maskovacej pásky utesnite všetky zásuvky a zariadenia alebo akékoľvek iné malé medzery, v ktorých nechcete usadiť prach. Môžete tiež použiť pásku na vymedzenie oblastí, ktoré nechcete z akéhokoľvek dôvodu brúsiť, a preto je užitočné použiť pásku na označenie vchodu do miestnosti, len ako vizuálnu pripomienku pre ostatných, aby nešli do miestnosti počas práce.

Nakoniec pásku prilepte cez spodné okraje a podlahové dosky kuchynských liniek alebo na akýkoľvek neodnímateľný nábytok a spodný okraj soklových dosiek, aby ste zabránili náhodnému odieraniu brúsky.


Nemôžete podceňovať množstvo prachu, ktoré táto práca vyprodukuje, a polyuretánový lak môže vydávať celkom silný zápach! Pri brúsení dávajte pozor, aby ste mali na sebe správny ochranný odev – bojlerové obleky, prachové masky a ochranné okuliare; parné respirátory, neoprénové alebo vinylové rukavice počas tmelenia.

KROK 3: BRÚSENIE drevenej podlahy

Nie všetky brúsky sú si rovné! V skutočnosti existuje veľmi veľký rozdiel medzi dvoma najbežnejšími typmi brúsk – bubnovou brúskou a brúskou a excentrickou orbitálnou rotaciou. Dajte si pozor na to, že ani ten najskvalenejší kutil nemusí byť vhodný pre nevhodnú brúsku. Tieto veľké zvieratá sú notoricky známe tým, že sú ťažké a ťažkopádne, čo sťažuje zabezpečenie rovnomerného brúsenia a často zanechávajú stopy, ktoré sú pri použití moridla na drevo veľmi zreteľné!

Z tohto dôvodu vám odporúčame, aby ste v požičovni strojov uviedli, že chcete veľkú orbitálnu brúsku, pretože brúsenie, ktoré tento typ brúsky vykonáva, je menej pravdepodobné, že zanechá stopy a nie je vôbec citlivé na smer zrna. , vďaka čomu je oveľa menej ťažkopádne použitie. Môžete si tiež prenajať menšie brúsky na rohy, ktoré budú užitočné na vstup do rohov a pozdĺž okrajov okolo vstavaných skriniek atď.

Dokonca aj s lepšou manipuláciou s orbitálnou brúskou existuje stále málo trikov z obchodu, ktoré musíte poznať, aby ste dosiahli najlepší výsledok. Webová stránka požičovne náradia Bauhaus obsahuje informácie o tom, ako používať pri brúsení podlah z tvrdého dreva orbitálnu brúsku Bona FlexiSand návod , a rady uvedené v letáku o brúsení sú pravdivé:

počas používania netlačte na brúsku, ale skôr nechajte brúsku robiť prácu za vás a udržujte ju v pohybe. Ak to necháte na jednom mieste príliš dlho, budete mať brúsny kruh, ktorý vyzerá ako malá mimozemská vesmírna loď pristála na vašom diele!

Hlavnou vecou je prístupovať k brúseniu s jemnosťou – koniec koncov, podlaha z tvrdého dreva je veľká investícia a nechcete ju rozdrviť brúsením pomocou rúk! Začnite s brúsnym kotúčom strednej triedy, aby ste odstránili starý povrch z dosiek z tvrdého dreva – najlepšie funguje 40,60-zrno. Podlahu dôkladne obrúste, aby ste neunikli žiadnym oblastiam. Použite brúsku na okraje, aby ste prešli po okrajoch a dostali sa do rohov. Použite ostrú škrabku na odstránenie všetkých oblastí, kde je starý povrch obzvlášť tvrdohlavý. Potom znovu brúste jemnejším brúsnym kotúčom, povedzme 80-hrubým zrnom a potom posledným prejdite ešte jemnejším – okolo 100-hrubým.

Pokúste sa celú oblasť naraz zbrúsiť s určitým stupňom zrnitosti, než sa presuniete na ďalšiu zrnitosť, aby ste zaistili rovnomerné brúsenie, a pravidelne vysávajte podlahu medzi brúsením, aby ste znížili prach. Po poslednom brúsení urobte veľmi opatrné vákuum a podlahu utrite mierne navlhčenou utierkou.


Po úspešnom odstránení všetkých starých povrchov a hladkých brúsených podlahových dosiek ste pripravení aplikovať moridlo na drevo. Ak sa snažíte farbu zladiť s inou časťou podlahy, je najlepšie najskôr urobiť náplasťový test na ploche, ktorá sa po vrátení nábytku neuvidí, čo umožní, aby škvrna úplne vyschla a skontrolovala farbu pred aplikovanim na zvyšok podlahy.

Pokračujte v aplikácii náteru v tenkej, rovnomernej vrstve. V tomto bode je dôležité, aby ste pracovali relatívne rýchlo, ale metodicky. Je lepšie aplikovať vrstvu na menšie časti podlahy, nie na všetky súčasne, ale zároveň sa chcete vyhnúť vyschnutiu vrstvy, čím sa vytvoria prekrývajúce sa značky, kde sa stretnú dve oblasti vrstvy. Z tohto dôvodu vám odporúčame použiť vrstvy na báze oleja, pretože schnutie zvyčajne trvá dlhšie, takže vám zostáva viac času na prácu!

Na nanesenie vrstvy môžete použiť štetec, handry alebo pórovité hubky – a potom pomocou suchej handry zotrite zvyšky. Je tiež možné naniesť vrstvu penovým valcom s vysokou hustotou, ktorý vás však môže zvádzať k väčším plochám a výsledkom sú prekrývajúce sa značky. Pred presunom do ďalšej fázy nechajte vrstvu dôkladne vyschnúť.


Teraz už nechcete ísť a ničiť to krásne zafarbenie pomocou zaprášených topánok, takže našim najlepším tipom je zložiť si topánky a urobiť tento krok tak, že si na nohách nechate len ponožky!

Zafarbenú podlahu musíte bezpodmienečne nalakovať, aby ste ochránili podlahu z tvrdého dreva pred poškodením vodou, odretím a poškriabaním.

Ideálne je aplikovať tri vrstvy polyuretánového laku. Najjednoduchší spôsob je použitie valca s vysokou hustotou s dlhou rukoväťou, ktorý pracuje metodicky a dávajte pozor, aby ste nenakvapkali lak na holé drevo (udržiavanie laku na plastovej plachte vám pomôže manévrovať s valcom bez odkvapkávania). ). Použite kvalitny štetec na orezanie laku okolo okrajov miestnosti a vstavaného nábytku. Chcete niečo tvrdšie ako jednoduchý polyuretán? Pozrite sa na profesionálne povrchové úpravy, ako je Bona Traffic.

Naneste lak čo najrovnomernejšie, ale nebojte sa, pretože polyuretán má zabudovanú samonivelačnú kvalitu, čo by malo znamenať, že pri zaschnutí získate rovnomernú vrstvu.

Lakovanie podlahy vám pravdepodobne zaberie celý deň. Pred nanesením druhého náteru budete musieť počkať aspoň hodinu, kým zaschne prvý náter, a potom by ste ho mali ideálne jemne obrúsiť veľmi jemným brúsnym kotúčom – okolo 240 zrnitosť. Znovu počkajte najmenej hodinu po druhom nátere, opäť vyleštite a potom naneste tretiu a poslednú vrstvu laku.

A tam idete; ste hotoví! Teraz však MUSÍTE počkať 48 hodín, než pôjdete po tejto nádhernej novo upravenej podlahe, takže ďalších pár dní strávte obdivovaním svojej práce zďaleka, zatiaľ čo budete plánovať ďalší domáci projekt podlaha z dreva !

Business Read More

The reason why Can be Bitcoin Fog up Gold mining the Approach Front?

Cloud mining allows you in order to access data centre processing capacity and obtain cryptocoins without having to purchase the right hardware, software program, spend money on electricity, maintenance, and the like. The essence of fog up gold mining is that it allows users to obtain the particular processing power of remote control data centres.

The full cryptocoin manufacturing process can be performed in the fog up, which makes fog up gold mining very useful for all those who else do not understand all the technical facets of the process and perform not want to function their own software or perhaps components. If electricity will be high-priced where you survive – for example within Germany – then, give the mining process inside a country where electrical energy will be less, such as the INDIVIDUALS.

Types of Bitcoin cloud mining:

There are presently three techniques to conduct mining in the fog up:

1 . Leased mining. Hire of the mining piece of equipment hosted simply by the provider.
2. Basically Hosted Gold mining. Creating a good virtual exclusive server and installing your own personal mining application.
3. Reserving hash power. Renting a great amount of hash power, without acquiring a passionate bodily or online products. (This is by way of far the most popular method of cloud mining).

Precisely what are the features of Bitcoin cloud mining?

instructions Not necessarily dealing with the excess heat generated by typically the machines.
– Avoiding the particular constant buzz in the fans.
– Not obtaining to pay electricity.
– Not selling your mining products when it is simply no longer profitable.
— Little ventilation issues with the apparatus, which is usually heated up a great deal.
– Avoiding a possibility delays in the supply of hardware.

What happen to be the disadvantages of Bitcoin cloud mining?

– Often the probability of fraud,
rapid Surgical procedures with bitcoins could certainly not be verified
: Unless you like to build your own Bitcoin hash systems, it may be boring.
– Lower profits — Bitcoin cloud exploration providers carry expenses.
rapid Bitcoin mining contracts may allow cessation of surgical procedures or payments if the Bitcoin price is also poor.
rapid Not being in a position to change mining computer software.

Risk of mining inside of the foriegn:

The chance of fraud and mismanagement is prevalent in typically the world of impair exploration. Investors should only commit if they are cozy with these risks – as they say, “never invest more than what exactly you are happy to reduce. ” Research internet sites, chat to old clients and even request all the doubts you consider suitable just before investing.

Is cloud hosting exploration profitable?

The answer to that question depends on quite a few components that affect often the profitability regarding investments. Expense is the most obvious factor. The service cost covers the cost involving electricity, hotel and equipment. On the other palm, the reputation and reliability with the company is some sort of determining component due to be able to the prevalence of frauds and bankruptcies.

Eventually, Bitcoin Code depends on factors that will no company can predict or even command: just remember this high volatility regarding Bitcoin in the last a few years. When you buy a exploration contract, marketing and advertising to believe a constant price to get Bitcoin, since your various other alternative is to buy bitcoins and wait for the price to go up. A further crucial factor will be the capability of the entire multilevel, which depends on the number of functions every second. Over the recent two years, power has greater exponentially. The advancement is going to continue to really rely with the value of Bitcoin plus innovation in this development of bundled circuits for particular software.

Business Read More